Copper Gadwa Lota Mini – Pure Copper Lota for Daily Pooja & Worship | Handcrafted

Copper Utensils

• 🍋 Lemon & Salt: Rub a lemon half dipped in salt on the surface. Leave for 2–3 minutes. Rinse and dry immediately.
• 🌿 Tamarind Paste: Apply tamarind paste, rub gently, rinse, and dry. Excellent for heavy tarnish.
• 🥶 Vinegar & Salt: Mix equal parts, apply with a soft cloth, leave for 5 minutes, rinse well, and dry.
• 🍼 Daily Rinse: Rinse with warm water after each use. Dry immediately — never air-dry or leave water inside.

With Lacquer/Meena Coating

Lacquer or Meena (enamel resin) coating gives your copper vessel its beautiful colour and design. With the right care, this coating stays vibrant for years — but it needs gentler handling than plain copper.

• 🧹 Wipe Gently: Use a soft, damp microfibre cloth. Wipe the outer surface lightly in circular motions. Never scrub.
• 🫧 Mild Soap if Needed: Add a drop of mild dish soap to lukewarm water. Dip a soft sponge and gently clean the outside. Avoid applying pressure on coated areas.
• 💧 Rinse Carefully: Rinse with slow-running lukewarm water. Do not submerge or soak.
• 🧺 Pat Dry Immediately: Use a soft, dry cloth. Pat gently — do not rub or wring. Never air-dry, as moisture can weaken the bond between the coating and copper.
• ☀️ Avoid Direct Sunlight: Prolonged UV exposure can fade Meena colours and crack resin coatings. Store in shade or a cupboard.
• 🌞 Keep Away from Heat: Do not place near stoves or in hot environments. Extreme heat can soften and peel the lacquer.
• 👁️ Handle with Care: Coating can chip on impact. Place on soft surfaces and avoid dropping. Never stack without padding between vessels.
• 📈 Dry Storage: Store in a cool, dry place. Humidity trapped inside can cause the coating to lift from the edges over time.
• 🧹 Clean Gently & Often: Light, regular wiping prevents buildup. Heavy scrubbing to remove old grime can cause more damage than the grime itself.
• 🌸 Polish Uncoated Areas Only: If the vessel has uncoated copper parts, polish only those areas with lemon & salt. Keep polishing agents away from the coated design.

Note:

• ❌ Never use a dishwasher: Heat and detergent can strip the coating completely.
• ❌ Never use lemon, tamarind, or vinegar on coated surfaces: Acids can damage or dissolve the lacquer.
• ❌ Never scrub with steel wool, abrasive sponges, or rough cloths.
• ❌ Never soak coated vessels: Prolonged exposure to water can lift the coating from the edges.
• ❌ Never use bleach, chemical cleaners, or polishing powders on coated areas.
• ❌ Never microwave or heat the vessel: Overheating can damage the coating and may release fumes.